Der EPARMS RotoClip, wurde speziell für Kombinierte und gängige Jagdapparate entwickelt. Mit einer garantierten Wiederholgenauigkeit von +/- 0,1 mm, ist er der einzige Adapter dieser Art auf dem Markt. Das zum weltweiten Patent angemeldete System zeichnet sich durch clevere Merkmale aus wie z.B. eine Feinzentrierung beim Einsetzen des Gewindeeinsatzes, das unterbrochene Rundgewinde und der Halbschalenspannung auf dem Objektiv des Zielfernrohrs. Auf Grund der sehr geringen Spannbreite von 15 mm (short) - 25 mm (long), ist auch eine kombinierte Ausstattung mit Vorsatzgeräten möglich, was bis dato noch keinem Hersteller auf dem Markt gelungen ist. Ein weiterer wesentlicher Vorteil ist die Mehrfachverwendung auf unterschiedlichen Zielfernrohren ohne erneutes Einschießen (nur Ersteinstellung nötig). Ein Beispiel: Sie haben ein Zielfernrohr mit 62 mm und ein weiteres mit 56 mm Außendurchmesser. Hier benötigen Sie nur einen weiteren Adapter in der dementsprechenden Größe Ihres Zielfernrohrs und können untereinander Ihr Gerät tauschen ohne den Adapter zu entfernen. Anleitung zur Montage und Inbetriebnahme: Der Adapter wird mit 4-6 Schrauben M3 fest auf dem Objektiv des Zielfernrohrs mit einer Anzugskraft von 1,8-2 Nm befestigt. Der Adapter muss vor der Verwendung ausgerichtet werden. Dies erfolgt wie bisher über das Hilfskreuz des Vorsatzgerätes (Wärmebild). Bei Nachtsichtgeräten ist darauf zu achten, was der Hersteller der Geräte angibt (Ausrichtung des Schalters z.B. 12 Uhr).Sofern Sie die Ausrichtung vorgenommen haben, können Sie mit dem Probeschießen beginnen und ggf. die Ausrichtung des Adapters korrigieren. Sind Sie mit dem Ergebnis zufrieden, können Sie nun auf Ihrem zweiten Zielfernrohr genauso vorgehen. Achtung!!!! Korrigieren Sie bitte nicht erneut Ihre Wärmebildkamera, sondern richten Sie Ihren Adapter so aus, dass das Hilfskreuz mit Ihrem Absehen übereinstimmt, so wie bei Ihrem ersten Zielfernrohr. Schießen Sie erneut und Sie werden feststellen, dass keinen nennenswerten Abweichungen auftreten werden.Für weitere Fragen oder Probleme kontaktieren Sie uns gerne. Welchen Außendurchmesser hat mein Zzielfernrohr?Hier Klicken
The EPARMS RotoClip is specially designed for Combined and common hunting rifles, it is the only adapter on the market that guarantees a repeatability of +/- 0.1 mm! The system, for which a worldwide patent is pending, is characterized by many features such as a fine centering when inserting the threaded insert, the interrupted round thread and the half-shell clamping on the objective of the scope. Due to the very small range of 15 mm (short) - 25 mm (long), it is also possible to equip combined rifles with attachments, which to date has not been achieved by any manufacturer on the market. Another significant advantage is the multiple use on different scopes without re-shooting!!! (Initial adjustment necessary) You have, for example, a scope with 62 mm outer diameter and another with 56 mm, here you need only another adapter in the corresponding size of your scope and can exchange among themselves your device without removing your adapter on the device. Mounting and commissioning instructions: The adapter is fixed with 4 - 6 screws M3 firmly on the objective of the scope with a tightening force of 1.8-2 Nm, the adapter must be aligned before use, this is done as before via the auxiliary cross of the attachment ( thermal image ), for night vision devices, pay attention to what the manufacturer of the devices indicates ( alignment of the switch, for example, 12 o'clock ). Provided you have made the alignment, you can start test shooting and correct the alignment of the adapter if necessary. If you are satisfied with the result, you can now proceed in the same way on your second scope. Attention !!!! Please do not correct your thermal sight again, but align your adapter so that the auxiliary crosshair matches your reticle as it did on your first scope. Shoot again and you will find that no significant discrepancies will occur. For further questions or problems, please contact us.
The EPARMS RotoClip is specially designed for Combined and common hunting rifles, it is the only adapter on the market that guarantees a repeatability of +/- 0.1 mm! The system, for which a worldwide patent is pending, is characterized by many features such as a fine centering when inserting the threaded insert, the interrupted round thread and the half-shell clamping on the objective of the scope. Due to the very small range of 15 mm (short) - 25 mm (long), it is also possible to equip combined rifles with attachments, which to date has not been achieved by any manufacturer on the market. Another significant advantage is the multiple use on different scopes without re-shooting!!! (Initial adjustment necessary) You have, for example, a scope with 62 mm outer diameter and another with 56 mm, here you need only another adapter in the corresponding size of your scope and can exchange among themselves your device without removing your adapter on the device. Mounting and commissioning instructions: The adapter is fixed with 4 - 6 screws M3 firmly on the objective of the scope with a tightening force of 1.8-2 Nm, the adapter must be aligned before use, this is done as before via the auxiliary cross of the attachment ( thermal image ), for night vision devices, pay attention to what the manufacturer of the devices indicates ( alignment of the switch, for example, 12 o'clock ). Provided you have made the alignment, you can start test shooting and correct the alignment of the adapter if necessary. If you are satisfied with the result, you can now proceed in the same way on your second scope. Attention !!!! Please do not correct your thermal sight again, but align your adapter so that the auxiliary crosshair matches your reticle as it did on your first scope. Shoot again and you will find that no significant discrepancies will occur. For further questions or problems, please contact us.
The EPARMS RotoClip is specially designed for Combined and common hunting rifles, it is the only adapter on the market that guarantees a repeatability of +/- 0.1 mm! The system, for which a worldwide patent is pending, is characterized by many features such as a fine centering when inserting the threaded insert, the interrupted round thread and the half-shell clamping on the objective of the scope. Due to the very small range of 15 mm (short) - 25 mm (long), it is also possible to equip combined rifles with attachments, which to date has not been achieved by any manufacturer on the market. Another significant advantage is the multiple use on different scopes without re-shooting!!! (Initial adjustment necessary) You have, for example, a scope with 62 mm outer diameter and another with 56 mm, here you need only another adapter in the corresponding size of your scope and can exchange among themselves your device without removing your adapter on the device. Mounting and commissioning instructions: The adapter is fixed with 4 - 6 screws M3 firmly on the objective of the scope with a tightening force of 1.8-2 Nm, the adapter must be aligned before use, this is done as before via the auxiliary cross of the attachment ( thermal image ), for night vision devices, pay attention to what the manufacturer of the devices indicates ( alignment of the switch, for example, 12 o'clock ). Provided you have made the alignment, you can start test shooting and correct the alignment of the adapter if necessary. If you are satisfied with the result, you can now proceed in the same way on your second scope. Attention !!!! Please do not correct your thermal sight again, but align your adapter so that the auxiliary crosshair matches your reticle as it did on your first scope. Shoot again and you will find that no significant discrepancies will occur. For further questions or problems, please contact us.
Der EPARMS RotoClip, wurde speziell für Kombinierte und
gängige Jagdapparate entwickelt. Mit einer garantierten Wiederholgenauigkeit
von +/- 0,1 mm, ist er der einzige Adapter dieser Art auf dem Markt.
Das zum weltweiten Patent angemeldete System zeichnet sich
durch clevere Merkmale aus wie z.B. eine Feinzentrierung beim Einsetzen des
Gewindeeinsatzes, das unterbrochene Rundgewinde und der Halbschalenspannung auf
dem Objektiv des Zielfernrohrs. Auf Grund der sehr geringen Spannbreite von 15
mm (short) - 25 mm (long), ist auch eine kombinierte Ausstattung mit
Vorsatzgeräten möglich, was bis dato noch keinem Hersteller auf dem Markt
gelungen ist.
Ein weiterer wesentlicher Vorteil ist die Mehrfachverwendung
auf unterschiedlichen Zielfernrohren ohne erneutes Einschießen (nur Ersteinstellung
nötig). Ein Beispiel: Sie haben ein Zielfernrohr mit 62 mm und ein weiteres mit
56 mm Außendurchmesser. Hier benötigen Sie nur einen weiteren Adapter in der
dementsprechenden Größe Ihres Zielfernrohrs und können untereinander Ihr Gerät
tauschen ohne den Adapter zu entfernen.
Anleitung zur Montage und Inbetriebnahme:
Der Adapter wird mit 4-6 Schrauben M3 fest auf dem Objektiv
des Zielfernrohrs mit einer Anzugskraft von 1,8-2 Nm befestigt. Der Adapter
muss vor der Verwendung ausgerichtet werden. Dies erfolgt wie bisher über das
Hilfskreuz des Vorsatzgerätes (Wärmebild). Bei Nachtsichtgeräten ist darauf zu
achten, was der Hersteller der Geräte angibt (Ausrichtung des Schalters z.B. 12
Uhr).
Sofern Sie die Ausrichtung vorgenommen haben, können Sie mit
dem Probeschießen beginnen und ggf. die Ausrichtung des Adapters korrigieren.
Sind Sie mit dem Ergebnis zufrieden, können Sie nun auf
Ihrem zweiten Zielfernrohr genauso vorgehen. Achtung!!!! Korrigieren Sie bitte
nicht erneut Ihre Wärmebildkamera, sondern richten Sie Ihren Adapter so aus, dass
das Hilfskreuz mit Ihrem Absehen übereinstimmt, so wie bei Ihrem ersten
Zielfernrohr.
Schießen Sie erneut und Sie werden feststellen, dass keinen
nennenswerten Abweichungen auftreten werden.
Für weitere Fragen oder Probleme kontaktieren Sie uns gerne.
185,99 €*
199,99 €*(économie de 7%)
Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...